Field studies, operator testimonials, and before-and-after comparisons across every product. We add to this page as trials come back.
Ultimate Stone, Elk Grove Village, Illinois, 2021. Sabre Jet XT bridge saw, 0.8% S Complex.
| Material | Fresh water | With S Complex | Change |
|---|---|---|---|
| Taj Mahal quartzite | 30 in/min | 135 in/min | 4.5x faster |
| Iceberg quartzite | 20 in/min | 95 in/min | 4.75x faster |
Hard Rock Stone Works, Sterling Heights, Michigan, 2021. Robo SawJet, 1% S Complex, recycled water.
| Material | Fresh water | With S Complex | Change |
|---|---|---|---|
| Dekton | 75 in/min | 250 in/min | 3.3x faster |
| Engineered quartz | 112 in/min | 250 in/min | 2.2x faster |
Hard basalt piling trial, 2024. SR60 rig, 1% Complex 42.
| Without | With Complex 42 | Change | |
|---|---|---|---|
| Time per hole | 630 min | 180 min | 3.5x faster |
| Fuel per hole | 436 L | 216 L | 50% less |
| Teeth per hole | 68 | 12 | 82% fewer |
Airport runway, 2021. Road saw, 1% C Complex.
Airport runway cut, 2021. A road saw dosed at 1% C Complex cut 118 linear meters at 430 mm depth in 57 minutes. The contractor said the same cut normally took two to three hours on that site. Slurry stayed close to the cut and vacuumed up easily, with minimal blade wear.
Stone fabrication shop, 2019.
A fabricator running S Complex on its saws for three months reported a large production increase, cleaner cuts, chipping and cracking on ultra-compact and sintered slabs resolved, and noticeably less noise on the hardest materials.
Full trial reports available on request.
